Specifications:

Size: DN50-DN1200

Pressure: PN10/16，Class150,JIS6K/10K

------------------------------------------------------------------------------------------

Materials:

Body : Cast Iron

Wedge: AISI304

Seal :EPDM

Stem : WCB

------------------------------------------------------------------------------------------

Operated:Manual Type Hand wheel

Applicable medium：Water, Oil,Gas

------------------------------------------------------------------------------------------

The opening and closing part of the knife gate valve is the gate plate, the direction of motion of the gate plate is perpendicular to the direction of the fluid, and the knife gate valve can only be fully opened and fully closed, and can not be adjusted and throttled. Most knife gate valves This type of valve should generally be installed horizontally in the pipeline.

 Knife gate valve is divided into:

Pneumatic knife gate valve Manual grout valve sprocket knife gate valve Electric knife gate valve Pneumatic knife gate valve dark rod Pneumatic knife gate valve American standard knife knife gate valve dark rod knife gate valve to clamp knife gate valve.

Standards

Materials

 Feature:

1. Ultra-short structural length, save materials, can make the overall weight of the pipeline system greatly reduced.

2.Occupy a small effective space, can effectively support the strength of the pipeline, can reduce the possibility of pipeline vibration.

3.The gate adopts austenitic stainless steel, the corrosion resistance is greatly improved, and the sealing leakage caused by the corrosion of the gate can be effectively prevented.

4. The upper sealing filler adopts flexible PTFE, reliable sealing, light and flexible operation.

5. The ram has the function of the knife, which can effectively break all kinds of debris in the medium.

6. Such as the use of hard sealed stainless steel, valve flap spray welding treatment, can be a good extension of the valve on the temperature, pressure requirements.